ETS currently manufactures 3 Models of  PoE IP camera or other Ethernet device kill switches, the PCKS-EA, PCKS and EDKS-4, EDKS-X and EDKS-1GEA.
EDKS-1GEA-RRSG and EDKS-1GEA-RPSG. These are typically used to interrupt power and or streaming of video/audio from PoE IP cameras for privacy or
confidentiality purposes.

 

   Go to ETS Main Page

   Go to Systems Integrator Specialty

       
Products Main Page


 

 

ETS
Electronic Technical Services Inc.
211 Conchas SE
Albuquerque, NM 87123

Phone: 505-888-3923
Fax: 505-888-3926

Toll Free: 866-700-3923

E-mail:  sales1@etsnm.com

 

 

 

Made in U.S.A.    

 

PoE IP Camera (or other IP device) Specialty Products
 

10/100M IP Camera or Other Ethernet connected device kill switches.

   PCKS
   PCKS-EA 
   EDKS-4

 

 10/100/1000 (1G) Shielded IP Camera or Other Ethernet connected device kill switch.

   EDKS-1G
   EDKS-x-1G-Vx-RM
   2 to 8 Channel kill switches

 

 10/100/1000 (1G) PoE++ Powered IP device kill switches NEW for 2023

   EDKS-1GEA
   EDKS-1GEA-RRSG  1G Kill switch on SIngle gang plate
   EDKS-1GEA-RPSG  1G Kill switch with proximity fob reader
   EDKS-1GEA-PKSG- 1G Kill switch with pattern keypad



Kill switches on wall plates

   RRGS
   RKGS
   RRSG-xSxGx  NEW for 2023 Multi-rocker stainless plates

 

IP Camera Status Indicator light

   CSSG   NEW for 2023


PCKS  IP Camera / Device Kill Switch

The PCKS is a device designed to
interrupt power and streaming of data from
an IP camera for privacy and confidentiality
purposes. The PCKS-EA  is 10/100M data rate
compatible and mechanically makes / breaks
data lines 1,2,3 and 6 with relays.
Typical
applications are in interview rooms,
interrogation rooms, hospital rooms and
patient exam rooms. The PCKS is placed in-line
with the camera's CAT5 Ethernet cable.
12-15vdc
is applied or removed to enable or disable the
camera depending on which version  PCKS is
ordered.
A switch can be mounted on the wall
of the room along with an external power source
to trigger the PCKS. Other equipment that outputs
a 12-15vdc 25ma power source can also be used
to trigger the PCKS. Supports 10/100M data rates

Two versions now available:

PCKS-VD. applying 12-15vdc disables camera
PCKS-VE  applying 12-15vdc enables camera

 


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Click on photo to enlarge


Application Diagram

Download Product Specification Sheet

Download Installation Instructions

 

 

 

New for 2024 two additional new versions now available that
disconnect data but not PoE power. Call for information


PCKS-EA  PoE powered IP Camera / Device Kill Switch

The PCKS-EA is a device designed to
interrupt power and streaming of data from a
PoE IP camera for privacy and confidentiality
purposes. The PCKS-EA  is 10/100M data rate
compatible and mechanically makes / breaks
data lines 1,2,3 and 6 with relays.
Typical
applications are in interview rooms,
interrogation rooms, hospital rooms and patient
exam rooms. The PCKS-EA is placed in-line
with the camera's CAT5 Ethernet cable. The PCKS
is designed to be used with our RRSG rocker switch
plate or RKSG key switch plate. When the switch is
in the 'on' position, the LED on the RxGP is lit and
the IP camera is connected to the Network switch.
When the switch is placed in the 'off' position, the
camera is disconnected. The RxSG switch
connects to the PCKS-EA via a user supplied 3
conductor cable. Supports 10/100M data rates



E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricin



Click on photo to enlarge


Application Diagram

Download Product Specification Sheet

Download Installation Instructions
 

 

New for 2024 one additional new version available now that
disconnects data but not PoE power. Call for information

 

EDKS-4  4 Channel PoE IP Device Kill Switch

The EDKS-4 is a device designed to
interrupt power and streaming of data from
up to 4 IP cameras or other Ethernet connected
devices. The EDKS-4  is 10/100M data rate
compatible and mechanically makes / breaks
data lines 1,2,3 and 6 with relays. The EDKS-4 is
placed  in-line with the end device's CAT5 Ethernet
cable.
12-15vdc is applied or removed to enable or
disablethe cameras depending on which version
EDKS-4is ordered.
A switch can be mounted on
the wall of the room along with an external power
source to trigger the EDKS-4. Other equipment
that outputs a 12-15vdc 100ma power source can
also be used to trigger the EDKS-4.

Two versions available:

EDKS-4-VD. applying 12-15vdc disables cameras.
EDKS-4-VE  applying 12-15vdc enables cameras.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing


Click on photo to enlarge


Application Diagram

Download Product Specification Sheet

Download Installation Instructions

 



EDKS-1G   Externally Powered 1G IP Device Kill Switch

The EDKS-1G is a device designed to
interrupt the power and streaming of data from
an IP camera or other Ethernet connected
devices. The EDKS-1G  is 10/100/1000 (1G) data rate
compatible and mechanically makes / breaks all
8 data lines with relays. The EDKS-1 is placed
in-line with the end device's CAT5 Ethernet cable.
12-15vdc is applied or removed to enable or disable
the camera / device depending on which version
EDKS-1 is ordered.
A switch can be mounted on
the wall of the room along with an external power
source to trigger the EDKS-4. Other equipment that
outputs a 12-15vdc 100ma power source can also be
used to trigger the EDKS-4.


EDKS-1G-VD. applying 12-15vdc disables cameras.
EDKS-1G-VE  applying 12-15vdc enables cameras.



E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Click on photo to enlarge


Application Diagram

Download Product Specification Sheet

Download Installation Instructions

New for 2024 two additional new versions now available that
disconnect data but not PoE power. Call for information



EDKS-x-1G-Vx-RM   1G 2-8 Channel IP Device Kill Switch

The EDKS-x is a device designed to interrupt
power and streaming data from up to 8 IP
cameras or other Ethernet connected devices
The EDKS-x is placed  in-line with the end device's
CAT6 Ethernet cable. 12-24vdc is applied or removed
to enable or disable the cameras depending on which
version EDKS-x is ordered. A switch or switches can be
mounted on a wall of the room(s) along with an external
power source to trigger the EDKS-x. Other equipment that
outputs a 12-24vdc 500ma power source can also be used
to trigger the EDKS-x.

Specify EDKS-x where x = number of channels required.

EDKS-x-1G-VD. applying 12-24vdc disables cameras.
EDKS-x-1G-VE  applying 12-24vdc enables cameras.



E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing


 
Click on photo to enlarge


Application Diagram

Download Product Specification Sheet

Download Installation Instructions

 

New for 2024 two additional new versions now available that
disconnect data but not PoE power. Call for information

 


EDKS-1GEA   PoE++ powered 1G IP Device Kill Switch

The EDKS-1GEA is a PoE++ powered device designed
to locally interrupt power and streaming of data from a
PoE++ IP camera or other PoE++ IP device. It supports
both modes or 802.3af and 10/100/100 data rates. The
EDKS-1GEA is placed in-line with the device's CAT5/6
Ethernet cable. The EDKS-1GEA is designed to be used
with our RRSG rocker switch plate or RKSG key switch
plate. When the switch is in the 'on' position, the LED on
the RxGP is lit and the IP camera is connected to the
Network switch.  When the switch is placed in the 'off'
position, the camera is disconnected. The RxSG switch
connects to the EDKS-1GEA via a user supplied 3
conductor cable.









E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Click on photo to enlarge


Application Diagram

Download Product Specification Sheet

Download Installation Instructions



EDKS-1GEA-RRSG   PoE++ powered 1G IP Device Kill Switch

The EDKS-1GEA-RRSG is a device designed to interrupt power to
a PoE++ IP device. It is typically used to enable/disable IP cameras
for privacy and confidentiality purposes. Applications include interview
rooms, Interrogation rooms, hospital rooms and patient exam rooms.
The EDKS-1GEA-RRSG  is placed in-line with the IP device’s CAT5/6 
Ethernet cable. When the switch is in the 'on' position, the LED on the
EDKS-1GEA-RRSG  is not lit and the IP camera is connected to the
Network switch. When the switch is placed in the 'off' position, the LED
is lit and the IP device is disconnected.

 








E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Click on photo to enlarge


Application Diagram

Download Product Specification Sheet

Download Installation Instructions



EDKS-1GEA-RPSG   PoE++ powered 1G IP Device Kill Switch
with Proximity fob reader.

The EDKS-1GEA-RPSG is a device designed to interrupt power
going to a PoE++ IP device with up to 169 memorized proximity
keychain fobs. It is typically used to disable / enable IP cameras
for privacy and confidentiality purposes. Applications include interview
rooms, Interrogation rooms, hospital rooms and patient exam rooms.
The EDKS-1GEA-RPSG  is placed in-line with the IP device’s CAT5/6
Ethernet cable. When the IP device is enabled, the LED on the
EDKS-1GEA-RPSG  is lit green. When the IP device is disabled the
LED is lit red.

 

 

 



E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Click on photo to enlarge


Application Diagram

Download Product Specification Sheet

Download Installation Instructions




EDKS-1GEA-PKSG   PoE++ powered 1G IP Device Kill Switch
with Pattern Keypad.


The EDKS-1GEA-PKSG is a device designed to interrupt power
going to a PoE++ IP device with up to 126 memorized 8 button
press, keypad pattern codes. It is typically used to disable / enable
IP cameras for privacy and confidentiality purposes. Applications
include interview rooms, Interrogation rooms, hospital rooms and
patient exam rooms. The EDKS-1GEA-PKSG  is placed in-line with
the IP device’s CAT5/6  Ethernet cable. When the IP device is
enabled, the green LED on the EDKS-1GEA-PKSG  is lit. When
the IP device is disabled the red LED.







E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Click on photo to enlarge


Application Diagram

Download Product Specification Sheet

Download Installation Instructions



RRSG   Stainless Rocker Switch with LED

The RRSG is a single gang stainless steel plate with
an illuminated (red LED) rocker switch mounted on it.
It has a circuit board with terminal blocks for connection
to all EDKS and PCKS products

Specify RRSG-PCKS for use with EDKS and PCKS products
Specify RRSG-PCKS-EA for use with PCKS-EA


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing


Click on photo to enlarge


RRSG-xSxGx   Multi-rocker, Multi-gang Stainless Plate

The RRSG-xSxGx- is a multi gang multiswitch stainless steel
plate with illuminated (red LED) rocker switches mounted on it.
It has circuit boards with terminal blocks for connections
to all EDKS and PCKS products. For use in centralized
control of multi-camera kill systems. Applications include
interview rooms and nursing stations. Use our CSSG
over the door of each room to indicate whether a camera
is turned on or off. Also features terminal block connections
for each switch

Available in the following configurations

-2S1GV   Two vertically oriented switches, 1 gang plate

-2S2GV   Two vertically oriented switches, 2 gang plate
-3S2GV   Three vertically oriented switches, 2 gang plate
-4S2GV   Four vertically oriented switches, 2 gang plate

-4S2GV   Four vertically oriented switches, 3 gang plate
-5S3GV   Five vertically oriented switches, 3 gang plate
-6S3GV   Six vertically oriented switches, 3 gang plate

-6S4GV   Six vertically oriented switches, 4 gang plate
-7S4GV   Seven vertically oriented switches, 4 gang plate
-8S4GV   Eight vertically oriented switches, 4 gang plate

-9S4GH   Nine horizontally oriented switches, 4 gang plate
-10S4GH Ten horizontally oriented switches, 4 gang plate
-11S4GH Eleven horizontally oriented switches, 4 gang plate
-12S4GH Twelve horizontally oriented switches, 4 gang plate

Other configurations and zone labeling available on request


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing


Click on photo to enlarge

Application Diagrams


CSSG   IP Camera Status indicator light

The CSSG is an indicator lamp that is typically used
along with a PCKS or EDKS device to indicate the
satatus of an IP camera. Can be configured for the LED
to be lit when a camera is connected to the network or

disconnected from the network by selecting -VE or -VD
optioned EDKS or PCKS devices


Available in two colors

CSSG-RED
CSSG-GREEN


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing


Click on photo to enlarge


RKSG   Stainless Key Switch with LED

The RKSG is a single gang stainless steel plate with
an illuminated (red LED) key switch mounted on it.
It has a circuit board with terminal blocks for connection
to all EDKS and PCKS products
.

Specify RKSG-PCKS for use with EDKS and PCKS products
Specify RKSG-PCKS-EA for use with PCKS-EA

 

 


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing


Click on photo to enlarge

Copyright ETS Inc. 2023