ETS manufactures many form factors of Mic level microphones. All Sound Surveillance tm ML1 series microphones
are electret style, with a Mic level output. They come standard with 3.5mm stereo connectors and can be ordered with
flying lead outputs. Most Ml1 series mics can also be ordered with higher performance microphone capsules.

 

   Go to ETS Main Page

   Go to Audio Surveillance
      Audio Products Main Page


Select a Sound Surveillance tm
Audio Product Line

   SM1 Pre-Amplified
      Microphones  


   ML1 Series Mic Level
      Microphones for IP
      Cameras and PCs

   PM1 Series 12-48vdc Phantom
      Powered Microphones


   Specialty Microphones

   Speaker / Microphones
      Amplified Speakers

   Interface Equipment

   Surveillance Kits

   Monitoring Stations,
      Switchers / Mixers

   Speakers

 

ETS
Electronic Technical Services Inc.
211 Conchas SE
Albuquerque, NM 87123

Phone: 505-888-3923
Fax: 505-888-3926

Toll Free: 866-700-3923

E-mail:  sales1@etsnm.com

 

 

 

Applications for our audio
surveillance products
include: remote monitoring,
asset protection, theft
 prevention, national security, homeland security, casino
soft count rooms, booking
rooms, interrogation rooms
prisons, sleep disorder
centers, therapy labs,
convenience stores, fast
food restaurants, nanny
cams,conference rooms,
zoos,parking structures,
elevators, stairwells,
industrial process
monitoring, etc. Any where
CCTV cameras are
installed, ETS products
can typically be installed.

 

 

 

Caution

It is the responsibility of the
installation company and end
user to install this audio surveillance
equipment in compliance with state
and federal privacy laws. If you
are unfamiliar with these laws,
consult a qualified attorney.

All ETS audio surveillance products
contain warning labels that are to be
posted at the installation site when
required by law (this is generally all
that is required). Upon request,
ETS will supply additional labels
free of charge
.

 

Sound Surveillance tm   Audio Security / Monitoring
Mic Level
Microphones for use with IP Cameras or PC inputs

Indoor Omni-directional microphones

   ML1-S
   ML1-SF
   ML1-LE
   ML1-LE2

Indoor Uni-directional microphones

   ML1-U
   ML1-ULE
   ML1-ULE2

Hanging microphones

   ML1-HD
   ML1-HDU

Covert Microphones

   ML1-C
   ML1-PH
   ML1-SD
   ML1-SDU
   ML1-RJ
   ML1-EJ
   ML1-MD

Gooseneck Microphone

 
 ML1-GN

 

 


Table Top Microphone

   ML1-T

Vandal Resistant Microphones

   ML1-TR
   ML1-SS

Outdoor Microphones

   ML1-W
   ML1-WP
   ML1-WPCF
   ML1-WPW
   ML1-WS
   ML1-WSWP
   ML1-WBE
   ML1-WBM
   ML1-TRW
   ML1-WSS
   ML1-WLSS
   ML1-WPSS
 

Compact, Vandal Resistant Indoor/Outdoor Microphones

   ML1-FE
   ML1-HS
   ML1-TRWCF
   ML1-UPM
 

Behind panel Mount weather proof Microphone

  
ML1-BM


ML1-S  Flush Mount,
Omni-Directional Microphone

The ML1-S is a low cost omni-
directional electret microphone
for use with IP cameras accepting
microphone level input signals.
(PC compatible input). The attached
cord is 6' long and comes standard
with a stereo 3.5mm connector on
one end.
Add -FL to the P/N for
a flying lead output for connections
to cameras with terminal blocks.

 


 


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25'


ML1-SF  Flush mount, Small Form
Factor Omni-Directional Microphone

The ML1-SF is a low cost omni-
directional electret microphone
for use with IP cameras accepting
microphone level input signals.
(PC compatible input). The attached
cord is 6' long and comes standard
with a stereo 3.5mm connector on
one end.  Microphone presses into a
7/16" hole drilled into dry wall, acoustic
ceiling tiles, etc.
Add -FL to the P/N for
a flying lead output for connections
to cameras with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing


Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25'

Also available in Black 


ML1-LE  Surface Mount,
Omni-Directional Microphone

The ML1-LE is a low cost omni-
directional electret microphone
for use with IP cameras accepting
microphone level input signals.
(PC compatible input). The attached
cord is 6' long and comes standard
with a stereo 3.5mm connector on
one end. 
Add -FL to the P/N for
a flying lead output for connections
to cameras with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing


Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25'

Also available in Black


ML1-LE2  Surface Mount,
Omni-Directional Microphone

The ML1-LE2 is a low cost omni-
directional electret microphone
for use with IP cameras accepting
microphone level input signals.
(PC compatible input). The attached
cord is 6' long and comes standard
with a stereo 3.5mm connector on
one end. 
Add -FL to the P/N for
a flying lead output for connections
to cameras with terminal blocks.





E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25'

Also available in Black


ML1-U  Flush mount,
Uni-Directional Microphone

The ML1-U is a low cost uni-
directional electret microphone for
use with IP cameras accepting
microphone level input signals
(PC compatible input).
The attached cord is 6' long and
comes standard with a stereo
3.5mm connector on one end.
Add -FL to the P/N for a flying lead
output for connections to cameras
with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25' 

Also available in Black


ML1-ULE  Surface mount,
Uni-Directional Microphone

The ML1-ULE is a low cost uni-
directional electret microphone for
use with IP cameras accepting
microphone level input signals
(PC compatible input).
The attached cord is 6' long and
comes standard with a stereo
3.5mm connector on one end.
Add -FL to the P/N for a flying
lead output for connections to
cameras with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25' 

Also available in Black


ML1-ULE2  Surface mount,
Uni-Directional Microphone

The ML1-ULE2 is a low cost uni-
directional electret microphone for
use with IP cameras accepting
microphone level input signals
(PC compatible input).
The attached cord is 6' long and
comes standard with a stereo
3.5mm connector on one end.
Add -FL to the P/N for a flying
lead output for connections to
cameras with terminal blocks.



E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25' 

Also available in Black


ML1-HD  Hanging
Omni-Directional Microphone

The ML1-HD is a low cost
omni-directional electret microphone
for use with IP cameras accepting
microphone level input signals
(PC compatible input). Designed
for high ceiling and high background
noise applications. The attached cord
is 6' long and comes standard with a
stereo 3.5mm connector on one end.
Add -FL to the P/N for a flying lead
output for connections to cameras
with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25'


ML1-HDU  Hanging
Uni-Directional Microphone

The ML1-HDU is a low cost
uni-directional electret microphone
for use with IP cameras accepting
microphone level input signals
(PC compatible input). Designed
for high ceiling and high background
noise applications. The attached cord
is 6' long and comes standard with a
stereo 3.5mm connector on one end.
Add -FL to the P/N for a flying lead
output for connections to cameras
with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25'


ML1-C  Covert, Omni-Directional
Microphone

The ML1-C is a low cost omni-
directional electret microphone
for use with IP cameras accepting
microphone level input signals
(PC compatible input). The attached
cord is 6' long and comes standard
with a stereo 3.5mm connector on
one end. 
Add -FL to the P/N for
a flying lead output for connections
to cameras with terminal blocks.



E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25' 


ML1-PH  Pin Hole covert Ceiling or Wall
Mount, Omni-Directional Microphone
 

The ML1-PH is a pin hole, covert, high
performance, low cost omni-directional
electret microphone for use with IP
cameras accepting microphone level
input
signals
(PC compatible input).
The ML1-PH is designed to be mounted
on the top side of ceiling tiles or drywall
and peer through a tiny hole made with
a counter sink drill bit. The attached cord
is 5' long and comes standard with a
stereo 3.5mm connector on one end.
Add -FL to the P/N for a flying lead
output for connections to cameras with
terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

IInstallation Instructions

Download Installation Drawing

Optional custom cord length up to 25

 



ML
1-SD  Covert Smoke detector
style Omni-Directional microphone

The ML1-SD is a low cost,
Omni-directional electret microphone
for use with IP cameras accepting
microphone level input signals
(PC compatible input). The covert
housing has the appearance of
a modern smoke detector.

The attached cord is 6' long and
comes standard with a stereo
3.5mm connector on one end.
Add -FL to the P/N for a flying lead
output for connections to cameras
with terminal blocks.



E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing


Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25'



ML
1-SDU  Covert Smoke detector
style Uni-Directional microphone

The ML1-SDU is a low cost,
Uni-directional electret microphone
for use with IP cameras accepting
microphone level input signals
(PC compatible input). The covert
housing has the appearance of
a modern smoke detector.

The attached cord is 6' long and
comes standard with a stereo
3.5mm connector on one end.
Add -FL to the P/N for a flying lead
output for connections to cameras
with terminal blocks.



E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing

Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25'



ML
1-RJ  Covert, RJ11 Jack Style
Omni-Directional Microphone

The ML1-RJ is a low cost omni-
directional electret microphone
for use with IP cameras accepting
microphone level input signals
(PC compatible input). The lower
RJ11 is a functional telephone jack
and the upper one houses a covert
microphone. The attached cord is
6' long and comes standard with
a stereo 3.5mm connector on one
end. 
Add -FL to the P/N for
a flying lead output for connections
to cameras with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25'



ML
1-EJ  Covert, RJ45 Jack Style
Omni-Directional Microphone

The ML1-RJ is a low cost omni-
directional electret microphone
for use with IP cameras accepting
microphone level input signals
(PC compatible input). The lower
RJ45 is a functional ethernet jack
and the upper one houses a covert
microphone. The attached cord is
6' long and comes standard with
a stereo 3.5mm connector on one
end. 
Add -FL to the P/N for
a flying lead output for connections
to cameras with terminal blocks.



E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing

Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25'



ML
1-MD  Covert, PIR Style
Omni-Directional Microphone

The ML1-MD is a low cost omni-
directional electret microphone
for use with IP cameras accepting
microphone level input signals
(PC compatible input). The covert
housing has the appearance of
a modern
PIR motion detector.
The attached cord is 6' long and
comes standard with a stereo
3.5mm connector on one end.
Add -FL to the P/N for a flying
lead output for connections
to cameras with terminal blocks.

 



E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing


Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25'



ML
1-GN  Goose Neck,
Directional Microphone

The ML1-GN is a low cost, directional,
heavy duty, flexible, goose neck
microphone for use with IP cameras
accepting microphone level input
signals
(PC compatible input)
The attached cord is 6' long and
comes standard with a stereo
3.5mm connector on one end.
Add -FL to the P/N for a flying
lead output for connections
to cameras with terminal blocks.





 E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing


 

Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25'


ML1-T  Table Top,
Omni-Directional Microphone

The ML1-T is a low cost omni-
directional electret microphone
for use with IP cameras accepting
microphone level input signals
(PC compatible input). The ML1-T
has built in weights and rubber feet
to keep the microphone from moving
around on a desktop. The attached
cord is 6' long and comes standard
with a stereo 3.5mm connector on
one end. 
Add -FL to the P/N for
a flying lead output for connections
to cameras with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25

 



ML
1-TR
Tamper Resistant
Omni-directional Microphone

The ML1-TR is an omni-directional
electret microphone for use with IP
cameras accepting microphone
level input
signals (PC compatible
input).The attached cord is 6' long
and comes standard with a stereo
3.5mm connector on one end.
Add -FL to the P/N for a flying lead
output for connections to cameras
with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25



ML
1-SS
Tamper Resistant
Omni-directional Microphone

The ML1-SS is an omni-directional
electret microphone for use with IP
cameras accepting microphone
level input
signals (PC compatible
input).The attached cord is 6' long
and comes standard with a stereo
3.5mm connector on one end.
Add -FL to the P/N for a flying lead
output for connections to cameras
with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

IInstallation Instructions

Optional custom cord length up to 25


ML1-W  Weather Resistant, Surface
mount Omni-Directional Microphone

The ML1-W is a low cost, IP54 rated
omni-directional electret microphone
for use with IP cameras accepting
microphone level input signals
(PC compatible input). The attached
cord is 6' long and comes standard
with a stereo 3.5mm connector on
one end.
Add -FL to the P/N for
a flying lead output for connections
to cameras with terminal blocks.



E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25'


ML1-WP  Weather Proof, Surface
Mount Omni-Directional Microphone

The ML1-WP is an IP67 rated,
omni-directional electret microphone
for use with IP cameras accepting
microphone level input signals
(PC compatible input).The attached
cord is 6' long and comes standard
with a stereo 3.5mm connector on
one end.
Add -FL to the P/N for a
flying lead output for connections to
cameras with terminal blocks.

 


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25'



ML1-WPCF  Compact, Weather Proof, Surface
Mount Omni-Directional Microphone

The ML1-WPCF is a compact IP67 rated,
omni-directional electret microphonee
for use with IP cameras acceptingg
microphone level inputt signalss
(PC compatible input).The attachedd
cord is 6' long and comes standardd
with a stereo 3.5mm connector onn
one end..
Add -FL to the P/N for a
flying lead output for connections to
cameras with terminal blocks.
 



E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing

 

Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25'


ML1-WPW  Weather Proof, Surface
mount Omni-Directional Microphone

The ML1-WPW is an IP57 rated,
omni-directional electret microphone
for use with IP cameras accepting
microphone level input signals
(PC compatible input).The attached
cord is 6' long and comes standard
with a stereo 3.5mm connector on
one end.
Add -FL to the P/N for a
flying lead output for connections
to cameras with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25' 


ML1-WS  Weather Resistant,
1/2" Knock out mountable
Omni-Directional Microphone

The ML1-WS is a low cost, IP54
rated omni-directional electret
microphone for use with IP cameras
accepting microphone level input
signals (PC compatible input).
The ML1-WS mounts in a standard 1/2"
electrical knock out hole. The attached
cord is 6' long and comes standard with
a stereo 3.5mm connector on one end.
Add -FL to the P/N for a flying lead
output for connections to cameras
with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25'

Also available in Black or Ivory


ML1-WSWP  Weather Proof,
1/2" Knock out mountable
Omni-Directional Microphone

The ML1-WSWP is an IP57
rated omni-directional electret
microphone for use with IP cameras
accepting microphone level input
signals (PC compatible input).
The ML1-WSWP mounts in a standard
1/2"electrical knock out hole. The
attached cord is 6' long and comes
standard with a stereo 3.5mm
connector on one end.
Add -FL to
the P/N for a flying lead output for
connections to cameras with terminal
blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Dowload Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25'

Also available in Black or Ivory


ML1-WBE Weather Resistant, Bullet Style
Omni-directional Microphone

The ML1-WBE is a low cost, IP54
rated, omni-directional electret
microphone for use with IP
cameras accepting microphone
level input
signals (PC compatible
input).The attached cord is 6'
long and comes standard with a
stereo 3.5mm connector on one
end.
Add -FL to the P/N for a
flying lead output for connections
to cameras with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25


ML1-WBM Weather Proof, Bullet Style
Omni-directional Microphone

The ML1-WBM is an IP57 rated,
omni-directional electret microphone
for use with IP cameras accepting
microphone level input signals
(PC compatible input).The attached
cord is 6' long and comes standard
with a stereo 3.5mm connector on
one end.
Add -FL to the P/N for a
flying lead output for connections
to cameras with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25



ML
1-TRW
Weather Proof, Tamper Resistant
Omni-directional Microphone

The ML1-TRW is a low cost, IP55
rated,  omni-directional electret
microphone for use with IP cameras
accepting microphone level input
signals (PC compatible input).
The attached cord is 6' long
and comes standard with a stereo
3.5mm connector on one end.
Add -FL to the P/N fora flying lead
output for connections to cameras
with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25


ML1-WSS
Tamper and Weather Resistant,
Omni-directional Microphone

The ML1-WSS is an IP54 rated, omni-
directional electret microphone for use
with IP cameras accepting microphone
level input
signals (PC compatible
input).The attached cord is 6' long
and comes standard with a stereo
3.5mm connector on one end.
Add -FL to the P/N for a flying lead
output for connections to cameras
with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25


ML1-WLSS
Tamper and Weather Resistant,
Omni-directional Microphone

The ML1-WLSS is an IP54 rated, omni-
directional electret microphone for use
with IP cameras accepting microphone
level input
signals (PC compatible
input).The attached cord is 6' long
and comes standard with a stereo
3.5mm connector on one end.
Add -FL to the P/N for a flying lead
output for connections to cameras
with terminal blocks

 



E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25


ML1-WPSS
Weather Poof,Omni-
directional Microphone

The ML1-WPSS is an IP67 rated,
omni-directional electret microphone
for use with IP cameras accepting
microphone level input signals
(PC compatible input).The attached
cord is 6' long and comes standard
with a stereo 3.5mm connector on
one end.
Add -FL to the P/N for a
flying lead output for connections to
cameras with terminal blocks.

 



E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing


Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25


ML1-FE  Panel Mount, Weather
Proof, Tamper Resistant, Omni-
Directional Microphone

The ML1-FE is a high performance,
low cost, IP54 rated, omni-
directional electret microphone for
use with IP cameras accepting
microphone level input
signals
(PC compatible input). The attached
cord is 6' long and comes standard
with a stereo 3.5mm connector on
one end. 
Add -FL to the P/N for
a flying lead output for connections
to cameras with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing


Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25


ML1-HS Panel Mount, Weather
and Tamper Resistant, Omni-
Directional Microphone

The ML1-FE is a high performance,
low cost, IP54 rated, omni-
directional electret microphone for
use with IP cameras accepting
microphone level input
signals
(PC compatible input). The attached
cord is 6' long and comes standard
with a stereo 3.5mm connector on
one end. 
Add -FL to the P/N for
a flying lead output for connections
to cameras with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing

Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25


ML1-TRWCF  Surface Mount,
Weather and Tamper Resistant,
Omni-Directional Microphone

The ML1-TRWCF is a high performance,
IP54 rated, omni-directional electret
microphone for use with IP cameras
accepting microphone level input signals
(PC compatible input). The attached
cord is 6' long and comes standard
with a stereo 3.5mm connector on
one end. 
Add -FL to the P/N for
a flying lead output for connections
to cameras with terminal blocks.


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing



Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25


ML1-UPM  Panel Mount, Weather
Resistant, Uni-Directional Microphone

The ML1-UPM is a high performance,
low cost, IP54 rated,uni-directional
electret microphone for use with IP
cameras accepting microphone level
input
signals
(PC compatible input).
The attached cord is 6' long and comes
standard with a stereo 3.5mm connector
on one end. 
Add -FL to the P/N for
a flying lead output for connections
to cameras with terminal blocks.

 

 


E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing

Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25

Also available in silver color.



ML1-BM  Behind Panel Mount, Weather
Resistant, Uni-Directional Microphone

The ML1-BM is a low cost omni-directional,
weather resistant (IP54) electret microphone
for use with IP cameras accepting
microphone
level input
signals (PC compatible input).
The ML1-BM is best suited for OEM applications
where a low profile appearance is desired. Its
designed to be mounted on the inside of metal
panels with only a 1/4-1/2 hole visible from the
other side.The attached cord is 6' long and
comes standard with a stereo 3.5mm connector
on one end. Add -FL to the P/N for a flying lead
output for connections to cameras with
terminal blocks.

 





E-mail sales1@etsnm.com
or Call 866-700-3923 for Pricing


Download Product Specification Sheet

Installation Instructions

Optional custom cord length up to 25

Also available in silver color.

Copyright ETS Inc. 2020